The product "Two Notes Torpedo Reload II Reactive Load Box" is in the cart.
Two Notes Torpedo Reload II Reactive Load Box
Product Code: TNRELOADII.......
LOADBOX AND ATTENUATOR
$1,499.99
Retail price: $2,049.00
Retail price: $2,049.00
- Price Range: 1000,00 - 1499,99$
TWO NOTES TORPEDO RELOAD II
Premium All-Analog Twin-Channel Multi-Impedance Reactive Load Box featuring a Celestion Approved Load Response, Continuous Attenuation, Dual Line Outputs, Stereo FX Loop and a 215W per channel Power Amplifier.
SPECIFICATIONS:
Input / Output
- Speaker Input
- Jack 6.35mm (1/4”) unbalanced (TS, Tip/Sleeve)
- Maximum input Voltage : 140V AC (45dBu)
- Max Security Load : 270O / 20W
Load Input Level
- Adjustable via potentiometer with continuous attenuation (-inf) to continuous amplification (+20dB)
Speaker Outputs
- (2) Jack 6.35 mm (1/4”) unbalanced (TS)
- Min Load : 3.5O
Max Output Power (single channel at THD+N <1%):
- 1 x 215 W RMS @ 4O
- 1 x 120 W RMS @ 8O
- 1 x 50W RMS @ 16O
Maximum Output Power (both channels driven at THD+N <1%):
- 2 x 150 W RMS @ 4O
- 2 x 120 W RMS @ 8O
- 2 x 50W RMS@ 16O
Level output adjustable for fine channel symmetry
Line Inputs
- Dual-Mono, (2) Jack 6.35mm (1/4”) balanced (TRS, Tip/Ring/Sleeve)
- Switched jacks for routing to an unplugged channel
- Impedance : 300O
- Gain (In to Out) : +4 to -inf dB
- Maximum Output Level : 20dBu
- Noise : Under -99dBu from 20Hz to 20kHz
- Frequency Response @ -1dB : 20Hz to 20kHz
FX Loop
- Dual-Mono Fx loop with independent CHANNEL A and CHANNELB controls
- (2) SEND + (2) RETURN via 6.35mm (1/4”) unbalanced (TS) Jack
- Compatibility with +4dBu and -10dBV devices, selectable via a dedicated switch per channel
- DRY/WET potentiometer with ON/OFF switch
- Facilities to Copy CHANNEL A return to CHANNEL B output via dedicated switch
- FX loop activation/deactivation via Footswitch with a 6.35mm (1/4”) Jack; (TRS, Tip/Ring/Sleeve) or (TS, Tip/Sleeve) compatible and configurable via a dedicated Footswitch behaviour switch
Load Box
- Reactive Load featuring a Celestion Approved Load Response with nominal impedance : 4- or 8- or 16-Ohms (switchable)
Maximum Admissible Power
- 200W RMS (assuming proper ventilation)
Maximum Temporary Admissible Power
- 250W peak (assuming proper ventilation)
Tone Shaping
- Tone Control
- (1) DEPTH and (1) PRESENCE control per CHANNEL
- Flat response on potentiometers at 0%
- (1) MOJO control per CHANNEL to deliver high-power feel at low volume
- Depth : +8dB @75Hz on potentiometer at 100%
- Presence : +8dB @4kHz on potentiometer at 100%
Safety / Protection
- Cooling
- Passive cooling with amplifier heatsink and Load Box heatsink
- Active cooling with temperature-controlled fan with 2 speeds (Slow & Boost)
Thermal Security
- To prevent damage to the internal Load Box, thermal cut off is implemented when the internal temperature rises over a predesignated threshold. When active, a 270O security load is placed into effect and the signal is muted
Power : Power Supply
Type : IEC60320 C14 power connector
Input Voltage : Compatible with 100V – 230V @ 50- to 60Hz
Power : 100W Max
Dimensions & weight, Width x Depth x Height:
- 365mm x 89mm x 220mm
- 365mm x 89mm x 240mm Including connectors and knobs
Weight : 6.9kg
Premium All-Analog Twin-Channel Multi-Impedance Reactive Load Box featuring a Celestion Approved Load Response, Continuous Attenuation, Dual Line Outputs, Stereo FX Loop and a 215W per channel Power Amplifier.
SPECIFICATIONS:
Input / Output
- Speaker Input
- Jack 6.35mm (1/4”) unbalanced (TS, Tip/Sleeve)
- Maximum input Voltage : 140V AC (45dBu)
- Max Security Load : 270O / 20W
Load Input Level
- Adjustable via potentiometer with continuous attenuation (-inf) to continuous amplification (+20dB)
Speaker Outputs
- (2) Jack 6.35 mm (1/4”) unbalanced (TS)
- Min Load : 3.5O
Max Output Power (single channel at THD+N <1%):
- 1 x 215 W RMS @ 4O
- 1 x 120 W RMS @ 8O
- 1 x 50W RMS @ 16O
Maximum Output Power (both channels driven at THD+N <1%):
- 2 x 150 W RMS @ 4O
- 2 x 120 W RMS @ 8O
- 2 x 50W RMS@ 16O
Level output adjustable for fine channel symmetry
Line Inputs
- Dual-Mono, (2) Jack 6.35mm (1/4”) balanced (TRS, Tip/Ring/Sleeve)
- Switched jacks for routing to an unplugged channel
- Impedance : 300O
- Gain (In to Out) : +4 to -inf dB
- Maximum Output Level : 20dBu
- Noise : Under -99dBu from 20Hz to 20kHz
- Frequency Response @ -1dB : 20Hz to 20kHz
FX Loop
- Dual-Mono Fx loop with independent CHANNEL A and CHANNELB controls
- (2) SEND + (2) RETURN via 6.35mm (1/4”) unbalanced (TS) Jack
- Compatibility with +4dBu and -10dBV devices, selectable via a dedicated switch per channel
- DRY/WET potentiometer with ON/OFF switch
- Facilities to Copy CHANNEL A return to CHANNEL B output via dedicated switch
- FX loop activation/deactivation via Footswitch with a 6.35mm (1/4”) Jack; (TRS, Tip/Ring/Sleeve) or (TS, Tip/Sleeve) compatible and configurable via a dedicated Footswitch behaviour switch
Load Box
- Reactive Load featuring a Celestion Approved Load Response with nominal impedance : 4- or 8- or 16-Ohms (switchable)
Maximum Admissible Power
- 200W RMS (assuming proper ventilation)
Maximum Temporary Admissible Power
- 250W peak (assuming proper ventilation)
Tone Shaping
- Tone Control
- (1) DEPTH and (1) PRESENCE control per CHANNEL
- Flat response on potentiometers at 0%
- (1) MOJO control per CHANNEL to deliver high-power feel at low volume
- Depth : +8dB @75Hz on potentiometer at 100%
- Presence : +8dB @4kHz on potentiometer at 100%
Safety / Protection
- Cooling
- Passive cooling with amplifier heatsink and Load Box heatsink
- Active cooling with temperature-controlled fan with 2 speeds (Slow & Boost)
Thermal Security
- To prevent damage to the internal Load Box, thermal cut off is implemented when the internal temperature rises over a predesignated threshold. When active, a 270O security load is placed into effect and the signal is muted
Power : Power Supply
Type : IEC60320 C14 power connector
Input Voltage : Compatible with 100V – 230V @ 50- to 60Hz
Power : 100W Max
Dimensions & weight, Width x Depth x Height:
- 365mm x 89mm x 220mm
- 365mm x 89mm x 240mm Including connectors and knobs
Weight : 6.9kg