The product "Two Notes OPUS Amp Simulator and DynIR Engine" is in the cart.
Two Notes OPUS Amp Simulator and DynIR Engine
Product Code: TNOPUS...........
AMP & CAB SIMULATOR
$429.99
Retail price: $599.00
Retail price: $599.00
- Price Range: 250,00 - 499,99$
TWO NOTES OPUS
The Next Evolution
Introducing OPUS, an end-to-end tone shaping Amp Simulator and DynIR Engine ushering-in the next milestone-evolution of the Two notes ecosystem. Building upon the C.A.B. lineage, OPUS adds Pre- & Power-amp Tube-Stage Modeling (TSM), MIDI integration and a future-proofed USB-C specification, empowering players of all-walks with apex-level tone in a go-anywhere footprint. OPUS, it’s more than our masterpiece: it’s a back-line in your gig-bag and a macrocosm of next-level tonal excellence.
SPECIFICATIONS:
Input / Output
- Amp/Inst/Line Input : 1/4" jack unbalanced (TRS)
Input Impedance:
- AMP :160kOhm unbalanced / 300kOhm balanced
- LINE : 37kOhm unbalanced / 55kOhm balanced
- INST. : 1Mohm unbalanced
Max Level (No Input Pad):
- AMP : 26.1dBu
- LINE : 11.3dBu
- INST. : 2.8dBu
Max Level (With Input Pad):
- AMP : 36.2dBu
- LINE : 20.8dBu
- INST. : 12.3dBu
Max Admissible Power For Amplifier Connection:
“IN LEVEL” Switch Set To “AMP”
“TO SPEAKER” output connected to a speaker rated at 16ohm
No input pad : 15.2W
With input pad : 100W
“TO SPEAKER” output connected to a speaker rated at 8ohm
No input pad : 30.3W
With input pad : 100W
“TO SPEAKER” output connected to a speaker rated at 4ohm
No input pad : 60.5W
With input pad : 100W
Aux In:
- 1/8" (3.5mm) TRS jack
Input Impedance : 29kOhm
TO SPEAKER Output*:
- 1/4" Jack balanced (TS)
*Unprocessed, unbuffered
DI Output*:
- XLR balanced
- Max level : 10dBu
- Output Impedance : 600ohm
*Protected against +48V phantom power
Line Output*:
- 1/4" (6.35mm) TRS jack
- Max level : 10dBu
- Output Impedance : 600ohm
*Not Protected against +48V phantom power
Headphone Output:
- 1/8" (3.5mm) TRS jack
- Max output power : 300mW under 100ohm
- Output impedance : 33ohm
USB Connector : USB-C 2.0
Memory
- DynIR Capacity : 64 DynIR
- Memory Card : 256Mb Micro-SD included Up to 32Gb cards supported
Digital Audio
- AD/DA Converters : Studio-grade 24-bit / 96 kHz
- Bandwidth (-1dB) : 30 Hz – 19 kHz
- Dynamic Range ratio : 101dB
- Internal Processing : 32-bit floating-point
- Latency : 2.2 ms (Line Input to Line Output)
Power input connector:
- Connector : 2.1mm x 5.5mm
- Polarity : Center negative
- Voltage : 12V DC
- Current : 200mA
- Power consumption : approx. 2W
Supplied adapter:
- Connector : 2.1mm x 5.5mm
- Polarity : Center negative
- Input Voltage : 100-240V AC , 50-60Hz
- Output Voltage : 12Vdc
- Max. Current : 2000 mA
Dimensions & weight Width x Depth x Height : 12.1cm x 10cm x 6cm – 4.8" x 4" x 2.4"
*Including connectors and knobs
Weight : 450 g / 0.99 lbs
The Next Evolution
Introducing OPUS, an end-to-end tone shaping Amp Simulator and DynIR Engine ushering-in the next milestone-evolution of the Two notes ecosystem. Building upon the C.A.B. lineage, OPUS adds Pre- & Power-amp Tube-Stage Modeling (TSM), MIDI integration and a future-proofed USB-C specification, empowering players of all-walks with apex-level tone in a go-anywhere footprint. OPUS, it’s more than our masterpiece: it’s a back-line in your gig-bag and a macrocosm of next-level tonal excellence.
SPECIFICATIONS:
Input / Output
- Amp/Inst/Line Input : 1/4" jack unbalanced (TRS)
Input Impedance:
- AMP :160kOhm unbalanced / 300kOhm balanced
- LINE : 37kOhm unbalanced / 55kOhm balanced
- INST. : 1Mohm unbalanced
Max Level (No Input Pad):
- AMP : 26.1dBu
- LINE : 11.3dBu
- INST. : 2.8dBu
Max Level (With Input Pad):
- AMP : 36.2dBu
- LINE : 20.8dBu
- INST. : 12.3dBu
Max Admissible Power For Amplifier Connection:
“IN LEVEL” Switch Set To “AMP”
“TO SPEAKER” output connected to a speaker rated at 16ohm
No input pad : 15.2W
With input pad : 100W
“TO SPEAKER” output connected to a speaker rated at 8ohm
No input pad : 30.3W
With input pad : 100W
“TO SPEAKER” output connected to a speaker rated at 4ohm
No input pad : 60.5W
With input pad : 100W
Aux In:
- 1/8" (3.5mm) TRS jack
Input Impedance : 29kOhm
TO SPEAKER Output*:
- 1/4" Jack balanced (TS)
*Unprocessed, unbuffered
DI Output*:
- XLR balanced
- Max level : 10dBu
- Output Impedance : 600ohm
*Protected against +48V phantom power
Line Output*:
- 1/4" (6.35mm) TRS jack
- Max level : 10dBu
- Output Impedance : 600ohm
*Not Protected against +48V phantom power
Headphone Output:
- 1/8" (3.5mm) TRS jack
- Max output power : 300mW under 100ohm
- Output impedance : 33ohm
USB Connector : USB-C 2.0
Memory
- DynIR Capacity : 64 DynIR
- Memory Card : 256Mb Micro-SD included Up to 32Gb cards supported
Digital Audio
- AD/DA Converters : Studio-grade 24-bit / 96 kHz
- Bandwidth (-1dB) : 30 Hz – 19 kHz
- Dynamic Range ratio : 101dB
- Internal Processing : 32-bit floating-point
- Latency : 2.2 ms (Line Input to Line Output)
Power input connector:
- Connector : 2.1mm x 5.5mm
- Polarity : Center negative
- Voltage : 12V DC
- Current : 200mA
- Power consumption : approx. 2W
Supplied adapter:
- Connector : 2.1mm x 5.5mm
- Polarity : Center negative
- Input Voltage : 100-240V AC , 50-60Hz
- Output Voltage : 12Vdc
- Max. Current : 2000 mA
Dimensions & weight Width x Depth x Height : 12.1cm x 10cm x 6cm – 4.8" x 4" x 2.4"
*Including connectors and knobs
Weight : 450 g / 0.99 lbs