RADIAL ENGINEERING PZ-DI ORCHESTRAL INSTRUMENT DI PIEZO OPTIMIZED ACTIVE DI

Up for sale a Radial Engineering PZ-DI Orchestral Instrument DI Piezo Optimized Active DI w/Box - #1530982!  We are an Authorized Dealer of Radial Engineering!  This item is an Open Box in Mint Cosmetic Condition and it comes with the Full Manufacturer's Warranty*.  On this one, there are few scratches, marks, barely few tiny nicks and few other imperfections here and there (see 7th to 12th pictures), but absolutely nothing major.  Also, the box is damaged (see 6th picture).  Unit comes in its Original Box. 

-

RADIAL ENGINEERING PZ-DI ORCHESTRAL INSTRUMENT DI

Variable Load Active DI with Piezo Optimized Input

The PZ-DI is an active direct box that has been designed for acoustic and orchestral instruments, with a variable load that allows you to set the optimal input impedance for your pickups for more natural-sounding results.

Piezo problem solver

The PZ-DI has a variable load selector switch that allows you to set the input impedance of the direct box, so you can optimize the performance with your instrument's pickups. The 1 meg ohm position delivers the classic impedance found on most active DI boxes, while the 220k ohm setting warms up the tone of magnetic pickups to provide the feel and tone as if your instrument were connected directly to an amplifier. The third setting is an ultra-high 10 meg ohm impedance that is specifically designed for piezo transducers, helping compensate for the harsh or squawky tone that can occur when a piezo is connected to a lower impedance input.

-

FEATURES:

- Optimized for orchestral instruments on a live stage

- Adjustable load for piezo and magnetic pickups

- Variable low-cut filter to control low frequency resonance

- Powered by 48V phantom, no batteries required

-

SPECIFICATIONS:

Audio circuit type : Proprietary analog circuit with low-noise FET op-amp

Frequency response : 20Hz ~ 20kHz

Dynamic range : 105dB

Gain : +4.6dB

Total harmonic distortion : 0.02%

Input Impedance : 10M/1M/220K-Ohms

Output Impedance : 200 Ohms - nominal

Equivalent Input Noise : -98dBu

Input pad

Input Connectors : 1/4" hi-Z input

Output Connectors : XLR male output

Construction : 48V phantom - proprietary digital switching

Weight : 1.2lb (0.54kg)

Shipping size (L x W x D) : 127 x 84 x 48mm (5.0" x 3.3" x 2")

Power : 48V phantom - proprietary digital switching

Conditions : For use in dry locations only between 5°C and 40°C

-

*The full manufacturer's warranty is only valid through us.