Jackson Audio Broken Arrow Comprehensive Overdrive/Boost Plateform Effect Pedal

Up for sale a Jackson Audio Broken Arrow Comprehensive Overdrive/Boost Plateform Effect Pedal ! This effect pedal is a Used Model in Very Good Cosmetic Condition and in Perfect Working Condition. On this one, there velcro tapes on the underside (see 4th picture) and there are some scratches, marks, barely few tiny nicks, slight plating deterioration and few other signs of wear here and there (see 7th to 12th pictures), but nothing major. Unit does not come with any power supply.

- 

JACKSON AUDIO BROKEN ARROW

Introducing the Jackson Audio Broken Arrow!

The BROKEN ARROW is a comprehensive overdrive platform that is designed to give guitarists an incredible range of overdriven tones with innovative features never before seen in ANY overdrive pedal ever made!

Keep reading below to learn more about the amazing features of the BROKEN ARROW!

The boost circuit is in its own true bypass loop which means it can be used independently of the DRIVE circuit. The boost circuit in the BROKEN ARROW is a MOSFET based boost much like the AMP MODE found in our best selling PRISM Preamp pedal. To activate/deactivate the boost circuit simply press the BOOST footswitch.

One of the things that makes the boost in the BROKEN ARROW different from other boosts on the market is that it has 4 presets available. Each preset is EQ’d slightly differently to allow it to alter how it interacts with the overdrive circuit in the BROKEN ARROW or any other pedal you may have in your rig.

Preset 1 – YELLOW LED: Bright Boost. Very useful for creating a thinner sound or when boosting a thick sounding overdrive.

Preset 2 – GREEN LED: Mid Boost. Not as thin as the yellow mode, the green mode allows more lows and takes on the character of a mid boost.

Preset 3 – AQUA LED: Tailored Boost. Most people will find this a perfect setting that will complement most any overdrive setting in the BROKEN ARROW.

Preset 4 – BLUE LED: Full Range. No tonal coloring here! Just your guitars natural tone!

To select a boost preset, press and hold the BOOST footswitch for more than 1 second and boost program mode will become active.

When in this mode, the BOOST led will flash to indicate that you are in program mode. A quick tap on the BOOST footswitch will cycle the boost presets and you’ll be able to hear these presets change as you cycle through them, assuming that the boost circuit was active when the boost program mode was entered. Once you arrive at a boost preset that you want to use, press and hold the BOOST footswitch for more than 1 second and boost program mode will exit.

-

SPECIFICATIONS:

VOLUME : Acts as a master volume for the overdrive circuit.

BOOST : Sets the amount of boost when the BOOST footswitch is engaged.

GAIN : Sets the maximum gain for the overdrive circuit.

BASS : The 12:00 position is totally flat with +/-12dB boost/cut on either side of center.

MIDDLE : The 12:00 position is totally flat with +/-12dB boost/cut on either side of center. The mid frequency is centered around 660hz.

TREBLE : The 12:00 position is totally flat with +/-12dB boost/cut on either side of center.

Input Impedance : 1M

Output Impedance : 100k

Power Supply : DC

Voltage Input : 9V MAX

Polarity : Center Negative

Max. Current Consumption : 100mA

Dimensions : 2.7” x 4.875?

Weight : 2 lbs