DARKGLASS ELECTRONICS DG112D INFINITY 500 COMBO 112 DIGITAL BASS COMBO AMPLIFIER

Up for sale a Darkglass Electronics DG112D Infinity 500 Combo 112 Digital Bass Combo Amplifier - #D12EQ982!  We are an Authorized Dealer of Darkglass Electronics!  This beautiful amplifier is an Open Box / Floor Demo Model in Excellent Cosmetic Condition and it comes with the Full Manufacturer's Warranty*.  On this one, there are some scratches, marks, few tiny nicks and few other imperfections here and there (see 9th to 18th pictures), but really nothing major. Unit comes with a Power Cord. 

- 

DARKGLASS ELECTRONICS DG112D INFINITY 500 COMBO 112

The Darkglass Infinity 1x12 combo amp is a revolutionary bass amplifier that redefines tonal possibilities.

A perfect blend of power and precision.

A powerful 500 Watt amplifier loaded with custom-made Eminence speakers, the Infinity Combo Series is designed for the modern bass player. Its user-friendly interface and cloud-storable presets allow for seamless transitions between different sounds on the go. Its sonic versatility makes it ideal for live performances and practice sessions of various genres.

-

FEATURES:

- 500W 1x12 digital combo amplifier

- Darkglass VMT, B3K, and Alpha Omega drive voices

- Sub octave with filter and blend

- Compressor with adjustable position (pre/post drive)

- Graphic EQ tuned for bass frequencies

- Pre/post XLR DI, line out, and headphone outputs

-

SPECIFICATIONS:

Top Panel Features:

- Input Jack : Use this jack to connect your instrument via a standard ¼” mono cable.

- Headphone Output : Connect your Headphones and enjoy an IR emulating your cabinet sound.

- Preset : Pressing the preset button changes through presets 1 to 5 and a bypass signal. Long press to store the current preset.

- Input : Controls the amount of analog input gain. Press to activate/deactivate the effects loop for the preset.

- Compression : Controls the amount of dynamic compression. The make up gain is adjusted automatically. Press to select between compressor OFF/Pre/Post drive position.

- Drive : Controls the amount of gain of the selected drive mode. Press to select between: OFF/Leo Bass/Vintage Microtubes/Microtubes B3K/Alpha·Omega. Long press to access the Noise Gate threshold control.

- Tone : Controls the Drivel tone/ Octaver filter. Press to select which control is active.

- Level : Controls the Drive level/ Tweeter level. Press to select which control is active.

- Blend : Controls the Drive blend/ Octaver blend. Press to select which control is active.

- Preset Vol : Controls the preset volume. Press to toggle between the 7 IR slots/IR bypass for Post DI & Headphone OUT.

- Graphic EQ section : Preset-specific Darkglass EQ. ± 12 dB @ Low Shelf/250 Hz/500 Hz/1.5 kHz/3 kHz/High Shelf.

- Master : Controls the overall volume of the speaker and headphone outputs. Press for Mute + Tuner. Long press for Bluetooth pairing. (Audio+Suite).

Back Panel Features:

- AC Power ON/OFF : Power ON the combo beast.

- AC Socket : Use this connector to feed electric power to the amplifier. 100 – 230 VAC, 50-60Hz. Set the voltage selector switch to the correct position before turning on the amplifier!

- MIDI In : Standard DIN connector. Use the 7-pin MIDI connector only with the Darkglass MIDI footswitch, and use a 5-pin connector with other MIDI equipment.

- USB : The USB-C port unlocks Combo’s USB audio interface capabilities and allows connection to the Darkglass Suite. USB MIDI In/Out is also supported.

- Post DI Output : Use this connector to send your signal to the console, mic preamp, interface, etc. This output provides the processed signal with or without the IR.

- Ground Lift : Use this control to lift the ground of the XLR outputs. If you are experiencing ground noise in your DI signal, try changing this control.

- Pre DI Out : Use this connector to send your signal to the console, mic preamp, interface, etc. This output provides the unprocessed signal.

- Line Out : Use this connector to send your signal to line input of a console, interface, etc. This output provides the processed signal without the IR. You can also link several combos together using this output!

- Line In : This input accepts +4 dBu line level signals from an amp modeler, keyboard, etc. Use this input when linking Darkglass Combos.

- Send : Use this output to send the signal to your outboard gear.

- Return : Use this input to receive the signal from your outboard gear.

- External Speaker : Use this connector to connect the amplifier to an external speaker cabinet. The SpeakON Combo jack allows for SpeakON or ¼” speaker cable operation. The minimum load impedance is 8 ohm. The minimum power rating must be 250 W.

WARNING : Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier.

-

*The full manufacturer's warranty is only valid through us.