STRYMON CONDUIT MIDI HUB

Smart MIDI Control for Your Pedals.
Conduit is a premium, easily configurable, ultra-reliable MIDI interface that will work with just about any quarter-inch MIDI equipped effects pedals you have, and it also offers the best USB computer connection available for any TRS MIDI pedal.

Front Panel

• ACTIVITY LEDs – Activity LEDs will blink when MIDI information is present at a 1/4″ jack.
• STATUS LED for 5-pin DIN I/O – Status LED lights up GREEN to indicate Conduit is powered on and will flash AMBER when MIDI data is passing through Conduit to the 1/4″ jacks.
• POWER – Use an adapter with the following rating: 9VDC center negative, 50mA minimum. Power supply is not required when connected via USB.
• DIN MIDI I/O Jacks – MIDI IN receives MIDI data from an external MIDI controller and sends the data to all four 1/4″ jacks. All MIDI data sent back from 1/4″ TRS connected pedals is merged and sent to the MIDI OUT. When USB is connected, MIDI data received at the 1/4″ jacks from the connected pedals is no longer merged to the MIDI OUT port, but is instead sent to the connected computer via it’s own MIDI port.
• SET BUTTON – Used for TRS MIDI I/O Jack configuration. The SET button can be pressed at any time to show configuration state of 1/4″ TRS jacks.
• USB-C – Used for computer connectivity. When USB is connected, the computer will recognize 6 MIDI I/O ports: Conduit MIDI Ports 1-4 correspond with the 1/4″ TRS jacks numbered 1-4. // Conduit MIDI Port 5 corresponds with the 5-DIN MIDI IN/MIDI OUT ports. // Conduit MIDI Port 6 will appear as a background USB communication port.

Rear Panel

• 1/4″ TRS MIDI I/O Jacks 1-4 – Out of the box, Conduit’s 1/4″ TRS MIDI jacks are configured to work with Strymon pedals, with no further setup necessary. Each jack is capable of sending and receiving MIDI data, and can be configured to work with a variety of different 1/4″ MIDI communication modes.